Socket CHS 8Ci, Быстрый старт

Страница: 16 / 28

USING THE SCANNER
Scanning Barcodes
After connecting the CHS to your device, open an application. Place
the cursor where you want to enter data.
Hold the CHS about 5-7 cm from the
barcode and press and hold the trigger
button. Make sure the red aiming beam
covers the entire width of the barcode.
Keep your hand steady.
By default, the CHS will beep, vibrate,
and the side LED will flash green to
confirm that the barcode was decoded
and sent to the host device.
For more details, please refer to the User’s Guide.
16