Socket CHS 7X, Руководство пользователя

Страница: 9 / 16

S
ETUP FOR
W
INDOWS
M
OBILE
STEP 1: T
URN ON THE
B
LUETOOTH
CHS
Press and hold the small power button until the LED turns blue and the scanner beeps twice (low-high). The
LED should blink blue once per second to show that the Bluetooth radio is on but not connected.
Time after turning on scanner Bluetooth mode
0-5 minutes Discoverable and connectable
2 hours If trigger button is not pressed,
scanner automatically powers off
STEP 2: ENABLE AND CONFIGURE B
LUETOOTH
SETTINGS
Note: Your Bluetooth software may vary from the screen shown.
1. To turn on your Bluetooth radio, tap Start
Æ
Settings, select the Connections tab.
2. Select the Bluetooth icon and select the Mode tab. Select the Turn on Bluetooth check box to enable the
radio. If the box is already checked, then the Bluetooth radio is already enabled.
3. Select the
Device tab and select Add new device.. or tap on Add at the bottom of the screen.