SNR SNR-S212i-8POE Series, Руководство по установке

Страница: 20 / 63

SNR-S212i-8POE Installation Guide Hardware structure
Shop.Nag.Ru 2016 10
2.2.2 Management and auxiliary interfaces
Table 2-1 lists management and auxiliary interfaces on the SNR-S212i-8POE.
Table 2-1 Management and auxiliary interfaces
Interface Description
Console Use the RJ45 Console cable to connect to the PC.
Alarm interface (ALM) 3-PIN Phoenix terminal (5.08 mm space) for outputting
alarms
Alarms generated on the SNR-S212i-8POE are
output from the alarm interface to the monitor which
records and monitors operation of the SNR-S212i-
8POE.
Digital input interface 5-PIN Phoenix terminal (5.08 mm space) for outputting
alarms, supporting 2 ways of digital input
The interface is available in A.10 or later versions.
Power interface 3-PIN Phoenix terminal (7.62 mm space) for inputting
power
2.3 Reset button
Table 2-2 describes the reset button.
Table 2-2 Reset button
Button Description
RST (button)
Short-press it to reset the system.
Long-press it over 5s to reset factory settings and restart
the SNR-S212i-8POE.
2.4 Interface parameters
2.4.1 1000BASE-X SFP optical interface
Table 2-3 lists parameters of the 1000BASE-X SFP optical interface.