SnowWolf Flex Plow, Руководство по эксплуатации и техническому обслуживанию

Страница: 14 / 52

12
Flex Plow Operation and Maintenance Manual
Safety
Importance of Safety
Operating Safety
• Read and follow instructions in this manual and
the machine’s Operators Manual before
operating.
• The Flex Plow attachment is intended for use
in snow removal. Use of this equipment in any
other manner is considered to be contrary to
the intended use of the attachment.
• Under no circumstances should young children
be allowed to work with this equipment.
• This equipment is dangerous to persons
unfamiliar with its operation.
• Check for overhead and / or underground lines
before operating equipment (if applicable).
• In addition to the design and configuration of
equipment, hazard control and accident
prevention
are dependent upon the
awareness, concern, prudence and proper
training of personnel involved in the operation,
transport, maintenance and storage of
equipment.
• Check that the attachment is securely fastened
to the machine.
• Make sure all the machine controls are in
NEUTRAL before starting the machine.
• Operate the equipment only from the
operator’s position.
• Operate the equipment according to the
Operator’s Manual.
• When learning to operate the equipment, do it
at a slow rate in an area clear of bystanders.
• DO NOT permit personnel to be in the work
area when operating the equipment.
• The equipment must be used ONLY on
approved machines.
• DO NOT modify the equipment in any way.
Unauthorized modification may impair the
function and / or safety and could affect the life
of the equipment.
• DO NOT make any adjustments or repairs on
the equipment while the machine is running.
• Keep shields and guards in place. Replace if
damaged.
• DO NOT operate equipment in poor visibility
conditions such as fog, darkness, or any
conditions that limit clear visibility less than 300
feet (100 m) in front of and to the sides of the
equipment.
• DO NOT operate in a work area that has not
been inspected for foreign debris and
obstacles.
• Remove any foreign objects and clearly mark
any objects that cannot be removed.
• Wear safety glasses, gloves, hard hat, hearing
protection and other protective clothing when
operating or maintaining this equipment.