Snowrex EJ-600, Руководство по эксплуатации, Страница: 6 / 6

5 6
Off
Hi-Lo setting
Compares all data
Beep sounds
setting at HI
Off
Long sounds bi--bi--bi--
Short sounds bi.bi.bi....
Beep sounds
setting at LO
Short sounds bi.bi.bi....
Off
Long sounds bi--bi--bi--
Long sounds bi--bi--bi--
Beep sounds
setting at OK
Off
Short sounds bi.bi.bi....
TARE
Long press key around 5 seconds and entering progamme sequence. SAMPLE
Press key to exit programming and restarting the balance.
>>>>>>>>
>>>>>>>>
and to select the digit blinking to change.
SAMPLE
Press key to set the value of the digit selected.
Press key to store the value, appears and proceed to the next step.
MODE
PRINT
TARE Press key to cancel the value and proceed to the next step.
Hi
>>>>>>>>
Press key repeatedly to cycle through different modes available,
Compares all stable data
Programme Operation
D. Comparator (Hi/Lo) Function
Lo
>>>>>>>>
1.
2.
3.
4.
The results of the comparison are indicated by HI, OK or LO on the display.
The comparison is as follows:
The upper limit and lower limit numerical values are common to each of the
WEIGHING, COUNTING and PERCENT mode. The example as follows.
Upper limit value “ 002010 ”: “ 20.10 g ” “ 2010 pcs ” “ 201.0% ”
Lower limit value “ 000660 ”: “ 6.60 g ” “ 660 pcs ” “ 66.0% ”
LO < Lower limit value OK Upper limit value < HI ≦ ≦ ≦ ≦
Selecting a comparison mode
1. Press and hold key to display
2. Press the key, then the balance displays
( If the comparison mode is already set, press the key
to go to “ Entering the upper and lower limit values”. )
SAMPLE
PRINT
3. Press the key several times to display
MODE
4. Press the key to store the settings. PRINT
SAMPLE
Entering the upper and lower limit values
5. With displayed. Press the key.
7. Press the key to return to weighing mode.
PRINT
Hi
Entering the upper and lower limit values using the following keys.
Key To select the digit blinking to change. SAMPLE
Key To set the value of the digit selected.
Key To store the value and proceed to next step. PRINT
MODE
Hi
Hi
6. With displayed. Press the key. PRINT
Entering the upper and lower limit values using the following keys.
Lo
Key To select the digit blinking to change.
SAMPLE
Key To set the value of the digit selected.
Key To store the value and proceed to next step. PRINT
MODE
Lo
Lo
TARE
TARE Key To cancel the value and proceed to the next step.
TARE Key To cancel the value and proceed to the next step.
>>> >
>>> >
>>> >
>>> >
Lo
0
g