You have purchased a quality precision weighing instrument that requires handling with care.
Read entire contents of this
Operating Manual
prior to operating your new instrument.
Disclaimer Notice
Calibrate your instrument using reference weights of the appropriate tolerance (class).
An instrument can be no more accurate than the standard to which it has been compared.
For assistance in the selection of reference weights, please contact the factory.
Caution: Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate this equipment.
Introduction
Thank you for choosing one of our instruments. Your instrument is designed and
manufactured to the most rigorous standards in order to give you years of service.
First, check the contents of the shipping carton. You should find the following :
* Manual * Instrument * AC Adapter
Next, follow the instructions for installing your instrument.
Now you are ready to begin using your instrument. To take advantage of its many features,
carefully read your operating manual.
It contains step-by-step procedures, examples, and other vital information.
Warning: Use of this product in a manner not specified by the manufacturer may impair any
safety protection provided by the equipment!
1
10
Error message
Symptom Cause Solution
Over load :
*
Weighing range exceed
>
Unload scale or reduce preload
Under load :
*
Weighing pan not in place
>
Ensure the weighing pan is correctly
installed and surrounding parts are
not touching
*
Weighing range zero below
>
Set scale to zero
*
Contact between weighing
>
Apply pre-load
Zeroing not possible :
*
Zeroing outside the zero
>
Ensure that zeroing is performed
setting range in the admissible range
( 20% of Cap.)