8
Unpacking
Carton Contents
• Electric pressure washer
• Trigger gun
• Adjustable spray wand assembly
• Three (3) large Phillips head screws
• Trigger gun holder
• Hose holder
• Needle clean-out tool (included with manual packet)
• High-pressure hose
• Garden hose adapter (female coupler)
• Manuals with registration card
1. Carefully remove the pressure washer and check to see
that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use your new electric
pressure washer. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils,
or small parts. These items can be swallowed and pose a
suffocation risk!
WARNING!
Do not connect to power supply until assembly
is complete. Failure to comply could result in accidental
starting and possible serious personal injury.
Assembly
Tools required: Phillips head screwdriver
1. To assemble the hose holder, slide the holder into position
and secure it to the unit with two screws (Fig. 1).
2. Slide the trigger gun holder into position (Fig. 2).
3. To assemble the spray wand protector, first snap the tab
into the slot located at the bottom left side of the unit, and
then secure it in place with the remained one screw.
(Fig. 3).
4. Fit the spray wand into the gun and rotate it until the two
parts are completely locked (Fig. 4).
Fig. 1
Hose holder
2 screws
Fig. 2
Trigger
gun
holder
Fig. 3
Screw
Spray wand
protector
Trigger gun
Spray wand
Fig. 4
