8
5. Connect the silver end of the high-pressure hose to the
trigger gun and twist the nut as indicated to secure the
connection (Fig. 5).
6. Connect the other end of the high-pressure hose to the
water outlet on the washer and twist the black rotatable
end-piece as indicated to secure the connection (Fig. 6).
WARNING!
Keep hose away from sharp objects. Bursting
hoses may cause injury. Examine hoses regularly and replace if
damaged. Do not attempt to mend a damaged hose.
7. Connect the garden hose adapter (female coupler) to
the water inlet of the pressure washer, then thread your
garden hose (male end) into the garden hose adapter
(Fig. 7). The garden hose must have an internal diameter
of at least 13 mm (1/2 in.) and must be reinforced. The
water supply must be at least equal to the washer delivery
capacity.
NOTE: The machine is not suitable for connection to the
potable water main.
8. Attach garden hose to water supply (Fig. 8).
WARNING!
The intake water temperature must
not exceed 104ºF/40ºC. The water supply must not
exceed 0.7 MPa.
CAUTION!
The washer must only be used with clean water;
use of unfiltered water containing corrosive chemicals will
damage the washer.
9. Make sure the motor switch is pushed to the OFF (0)
position before plugging the unit into the power outlet
(Fig. 9).
Fig. 5
High pressure hose
Trigger gun
Fig. 6
(BACK)
(BACK)
Water outlet
High-pressure hose
Fig. 7
(FRONT)
Water inlet
Garden hose
This end to
water inlet
Garden hose
(male end)
Fig. 8
Connect to water supply
Garden hose
