background image

2

properly and perform its intended function. Check for 

alignment of moving parts, binding of moving parts, 

breakage of parts, mounting, and any other conditions 

that may affect its operation. A guard or other part that 

is damaged should be properly repaired or replaced by 

an authorized service center unless otherwise indicated 

elsewhere in this manual.

11. Use of accessories and attachments – The use of any 

accessory or attachment not recommended for use with 

this appliance could be hazardous. Note: Refer to the 

accessory section of this manual for further details.

Additional Warnings for Edger + Trencher

1.  Keep guard in place.
2.  Keep blade area clean.

m

DANGER! 

Risk of injury. Keep hands and feet away 

from blade and cutting area.
Important Warning:
When using the edger + trencher, stones, pieces of metal 

and other objects can be thrown out at high speed by the 

blade. The tool and guard are designed to reduce the danger. 

However, the following special precautions should be taken:

1.  Wear safety glasses or other eye protection, gloves, long 

pants and substantial footwear.

2.  Make sure that other persons and pets are at least 100 ft. 

(30.5 m) away.

3.  Always stand to left side of main handle.
4.  Before Landscaping or Trenching, check for buried 

electrical cables.

5.  To reduce the risk of rebound (ricochet) injury, work going 

away from any nearby solid object such as a wall, steps, 

large stone, tree, etc. Use great care when working close 

to solid objects or into the wind, and, where necessary, do 

edging or trimming by hand.

Electrical Safety

1.  Ground fault circuit interrupter (GFCI) protection should  

be provided on the circuit(s) or outlet(s) to be used for  

this electric edger + trencher. Receptacles are available 

having built-in GFCI protection and may be used for this  

measure of safety.

2.  To reduce the risk of electric shock, this appliance has a 

polarized plug (i.e. one blade is wider than the other). Use 

this appliance only with a polarized UL-, CSA-, or ETL-

listed extension cord recommended for outdoor,  

all-weather use, such as the Snow Joe

®

 + Sun Joe

®

  

SJTW-A 14-gauge 50-foot extension cord with lighted 

end (Model PJEXT50-B). Visit sunjoe.com to purchase 

this extension cord online or, to order by phone, call 

1-866-SNOWJOE (1-866-766-9563).

  The appliance plug will fit into a polarized extension 

cord only one way. If the appliance plug does not fit 

fully into the extension cord, reverse the plug. If the plug 

still does not fit, obtain a correct polarized extension 

cord. A polarized extension cord will require the use of a 

polarized wall outlet. The extension cord plug will fit into 

the polarized wall outlet only one way. If the plug does 

not fit fully into the wall outlet, reverse the plug. If the plug 

still does not fit, contact a qualified electrician to install 

the proper wall outlet. Do not modify the appliance plug, 

extension cord receptacle, or extension cord plug in any 

way.

3.  To prevent electric shock, use only with an extension cord 

suitable for outdoor use, such as SW-A, SOW-A, STW-A, 

STOW-A, SJW-A, SJOW-A, SJTW-A, or SJTOW-A.

  Before use, check that the extension cord is in good 

condition. When using an extension cord, make sure to 

use one heavy enough to carry the current your product 

will draw. An undersized cord will cause a drop in line 

voltage resulting in loss of power and overheating.

Extension Cord

Length

Wire Gauge (A.W.G.):

Up to 50 ft

(15 m)

+50 ft - 100 ft

(+15 m - 30 m)

14

12

m

          

WARNING 

 

m

Electric shock may cause SEVERE INJURY or 

DEATH. Heed these warnings:

•  Do not allow any part of the electric edger + trencher 

to make contact with water while it is in operation. If 

the appliance becomes wet while turned off, wipe dry 

before starting. 

•  Use only a UL-, CSA-, or ETL-rated extension cord 

for outdoor, all-weather use, such as the Snow Joe

®

Sun Joe

®

 SJTW-A 14-gauge 50-foot extension cord 

with lighted end (Model PJEXT50-B). 

Visit sunjoe.com to purchase this extension cord 

online or, to order by phone, call 1-866-SNOWJOE  

(1-866-766-9563).

•  Do not use an extension cord over 100 ft (30 m).
•  Do not touch the appliance or its plug with wet hands 

or while standing in water. Wearing rubber boots 

offers some protection. 

EXTENSION CORD CHART

Содержание Sunjoe SJEDGE7-RM

















Отзывы: