SNOWJOE SUNJOE iON100V-10PS-CT-RM Скачать руководство пользователя

Страница: 10 / 28

Technical Data

Battery Voltage* ...........................100 V D.C.

Battery Capacity ..........................See page 24 for battery

options and specifications

Charging Time Max .....................See page 24 for battery

options and specifications

Battery Runtime Max ...................See page 24 for battery

options and specifications

Charger Input...............................100 – 120 V AC,

50 – 60 Hz, 500 W

Charger Output ............................100 V DC 4 A

Cutting Thickness Max ................9.5 in. (24.1 cm)

Recommended: 8.5 in. (21.6 cm)

Bar Chain Length ........................10 inch (25.4 cm)

Pole Length .................................8.9 ft (2.7 m)

Overhead Reach Max ..................14.9 ft (4.5 m)

Oil Tank Capacity ........................

3.72 fl oz (110 ml)

Motor ...........................................650 W Brushless

Weight (pole chain saw only) .......10.4 lbs (4.7 kg)

Weight .........................................14.4 lbs (6.5 kg)

(pole chain saw + iON100V-2.5AMP)

Weight .........................................17.3 lbs (7.8 kg)

(pole chain saw + iON100V-5AMP)

*Initial no-load voltage, when fully charged, peaks at 100 volts; nominal voltage

under typical load is 86.4 volts

Unpacking

Carton Contents

•  Pole saw head assembly
•  Extension pole
•  Rear pole assembly
•  Coupler knobs (2)
•  Shoulder strap
•  10 in. (25.4 cm) cutting chain
•  10 in. (25.4 cm) guide bar
•

Socket blade screwdriver

• Cutting bar sheath
• Manuals and registration card

1. Carefully remove the cordless pole chain saw and check

to see that all of the above items are supplied.

2. Inspect the product carefully to make sure no breakage or

damage occurred during shipping. If you find damaged or

missing parts, DO NOT return the unit to the store. Please

call the Snow Joe

+ Sun Joe

customer service center at

1-866-SNOWJOE (1-866-766-9563).

NOTE: Do not discard the shipping carton and packaging

material until you are ready to use your new cordless pole

chain saw. The packaging is made of recyclable materials.

Properly dispose of these materials in accordance with

local regulations.

IMPORTANT! The equipment and packaging material are

not toys. Do not let children play with plastic bags, foils

or small parts. These items can be swallowed and pose a

suffocation risk!

Assembly

CAUTION!

Do not install the battery before fully

assembling the unit.

WARNING!

Mount the components very carefully so

as not to impair the safety and efficiency of the machine. If in

doubt, contact your dealer.

WARNING!

Unpacking and assembly should be

completed on a flat and stable surface, with adequate space

for moving the machine and its packaging.

Installing/Replacing the Guide Bar

and Chain

WARNING!

Always wear heavy-duty gloves when

handling the bar and chain. Mount the bar and chain very

carefully so as not to impair the safety and efficiency of the

machine. If in doubt, contact an authorized Snow Joe

Sun Joe

dealer or call the Snow Joe

+ Sun Joe

customer

service center at 1-866-SNOWJOE (1-866-766-9563).

WARNING!

When installing/replacing the guide bar and

chain, use only identical replacement parts. Make sure the

battery is not inserted in its housing.

1. Using the supplied socket wrench, unscrew the sprocket

cover nut and remove the sprocket cover (Figs. 1 & 2).

CORE TOOL

B CHARGER SOLD SEPARATELY

In order to operate this pole chain saw, you will need

to additionally purchase either the iON100V-2.5AMP or

iON100V-5AMP lithium-ion battery and the 100 V quick

charger (model iON100V-RCH). Battery and charger options

available at snowjoe.com.

Fig. 1

Socket wrench

Sprocket

cover nut

Содержание SUNJOE iON100V-10PS-CT-RM





























Результаты поиска

Содержание SUNJOE iON100V-10PS-CT-RM

Отзывы:

Похожие инструкции для SUNJOE iON100V-10PS-CT-RM

Бренды по названию

Популярные бренды

SNOWJOE SUNJOE iON100V-10PS-CT-RM, Руководство оператора

Результаты поиска

Содержание SUNJOE iON100V-10PS-CT-RM

Отзывы:

Похожие инструкции для SUNJOE iON100V-10PS-CT-RM

Бренды по названию

Популярные бренды