background image

22

3.  Failure to insert batteries in the correct polarity, as 

indicated in the battery compartment or manual, may 

shorten the life of the batteries or cause batteries to leak.

4.  Do not mix old and new batteries.
5.  Do not mix Alkaline, Standard (Carbon-Zinc) or 

Rechargeable (Nickel Cadmium, Nickel Metal Hydride, or 

Lithium-Ion) batteries.

6. 

Do not dispose of batteries in fire.

7.  Batteries should be recycled or disposed of as per state 

and local guidelines.

Support

If your Sun Joe

®

 iON100V-10PS-CT-RM cordless pole 

chain saw requires service or maintenance, please call 

1-866-SNOWJOE (1-866-766-9563) for assistance.

Model + Serial Numbers 

When contacting the company, reordering parts or arranging 

service from an authorized dealer, you will need to provide the 

model and serial numbers, which can be found on the decal 

located on the housing of the unit. Copy these numbers into 

the space provided below.

Record the following numbers from the housing or handle of your  

new product:

   i    O   N    1   0   0   V    -    1   0    P   S   -    C   T    -   R   M

Model #:

Serial #:

Содержание SUNJOE iON100V-10PS-CT-RM





























Отзывы: