SNOWJOE Sunjoe 24V-X2-TLR14-CT-RM, Руководство оператора

Страница: 11 / 20

11
IMPORTANT! Never allow the battery packs to become
fully discharged as this will cause irreversible damage to
the batteries.
6. When charging is complete, remove the batteries from the
charger by pulling the push lock button and sliding the
batteries backward to unlock it from the charger.
Charging a Hot or Cold Battery Pack
The green indicator lights on the charger base indicates that
the battery packs' temperatures are outside the charging
range. Once the packs are within the acceptable range, normal
charging will take place and the red light will be continuous.
Hot or cold battery packs may take longer to charge.
Assembly
Upper Handles Assembly
1. Separate the upper handle frame by removing the 4
screws. Retain the screws (Fig. 4).
2. Fit the left upper handle and the right upper handle in
the handle grooves of the upper handle frame rear piece.
Make sure the holes are aligned (Fig. 5).
3. Put the handle frame front piece in place, inserting the 4
pegs into the holes on the handle frame rear piece (Fig. 6).
4. Join the assembly with the original 4 screws, as shown
(Fig. 7).
Connect Handle Frames
1. Connect the upper handle frame assembly to the middle
handle frame by 2 sets of handle knobs + bolts, as shown
(Fig. 8).
Fig. 4
Upper handle
frame rear
piece
Upper handle
frame front
piece
Fig. 5
Upper handle
frame rear
piece
Left upper
handle
Right upper
handle
Align the holes
Handle frame
front piece
Fig. 6
Fig. 7
Fig. 8
Handle knob
+ bolt
Middle
handle frame