background image

10

2.  Depending on your Snow Joe

®

 + Sun Joe

®

 charger 

model, how to recharge your lithium-ion batteries will 

vary. You may either insert your 24-volt batteries into the 

24VCHRG-QC Quick Charger (sold separately) or the 

24VCHRG-DPC Dual Port Charger (sold separately)  

(Figs. 2 – 3).

3.  The battery indicator LEDs will illuminate one by one 

during the charging process. Unplug the charger 

immediately when the 3 LEDs are all illuminated.

4.  The 24VCHRG-QC Quick Charger (sold separately) and 

the 24VCHRG-DPC Dual Port Charger (sold separately) 

are also equipped with additional charging indicating 

lights which will indicate the charging status (Figs. 2 – 3).

m

CAUTION!

 FIRE HAZARD. When remove the batteries 

from the charger, be sure to unplug the charger from the outlet 

first, then remove the batteries from the charger. 

m

WARNING!

 This charger does not automatically turn 

off when the batteries are fully charged. Please take care not 

to leave the batteries in the charger. Switch off or unplug the 

charger at the mains when charging is complete.

5.  Timely recharging of the batteries will help prolong the 

batteries' life. You must recharge the battery packs when 

you notice a drop in the equipment's power.

IMPORTANT! Never allow the battery packs to become  

fully discharged as this will cause irreversible damage to  

the batteries. 

6.  When charging is complete, remove the batteries from the 

charger by pulling the push lock button and sliding the 

batteries backward to unlock it from the charger.

Operation

m

WARNING! 

Always wear safety goggles or safety 

glasses with side shields when operating power tools. Failure 

to do so could result in objects being thrown into your eyes, 

causing possible serious injury.

m

WARNING! 

Do not use any attachments or accessories 

not recommended by the manufacturer of this product. The 

use of attachments or accessories not recommended can 

result in serious personal injury.

Holding the Trimmer

Before operating the hedge trimmer, stand in the operating 

position and perform the following checks:

1.  You are wearing all of the necessary personal protective 

equipment, including protective gloves, non-slip footwear, 

safety goggles, ear defenders, and close-fitting clothing. 

2.  You are holding the unit firmly with both hands. Your right 

arm is slightly bent and is holding the rear handle, and 

your left arm is straight and is holding the front handle. 

3.  You are standing with proper footing and are holding the 

hedge trimmer so that the cutting blades are always away 

from your body.

m

WARNING! 

Always keep both hands on the hedge 

trimmer handles. Never hold shrubs with one hand and operate 

the hedge trimmer with the other. Improper handling of the 

hedge trimmer could result in serious injury.

Fig. 1

Battery 

packs

Battery 

Compartment

Push lock 

button

Fig. 2

Battery pack

24VCHRG-QC 

quick charger  

(Sold separately) 

red

Charging

green

Fully 

Charged

Fig. 3

Battery pack

24VCHRG-DPC  

dual port charger 

(Sold separately)

red

Charging

green

Fully 

Charged

Содержание Sunjoe 24V-X2-24HT-CT-RM





















Отзывы: