8
Turning ON/OFF (Fig. 4)
The lantern has five settings: daylight, warm white, combined,
warning light and off.
•
Daylight: Press the power button once.
•
Warm White: Press the power button twice.
•
Day + Warm Light Combined: Press the power button a
third time.
•
Warning: Press the power button a fourth time.
•
Off: Press the power button a fifth time.
NOTE: Long-press the power button to adjust the brightness
on each setting.
Hanging the Lantern
m
WARNING!
Only hang the lantern in an area where
no electrical wires, utility cables, pipes, or other obstructions
are located. Contact your local utility company or a qualified
electrician if you are unsure. Do not hang the lantern from an
electrical power cord. Ensure the lantern is securely installed to
prevent hazard from falling. Failure to follow these instructions
can result in electrocution, electrical shock, or other serious
personal injury.
Power
button
Fig. 4
1. Lift the hanging hook and rotate to the desired position for
hanging (Fig. 5).
NOTE: Do not attach anything other than the battery pack
to the lantern when it is hanging from the hook. Do not
stand under the hanging lantern to prevent hazard from
falling.
2. Be careful not to hang the lantern in a position that
prevents normal operation of the lantern.
3. When not hanging, pull out the handle and use it as a
night light (Fig. 6).
Hanging hook
Fig. 5
Handle
Fig. 6
