2
18. Avoid unintentional starting – Don’t insert battery pack in
appliance with finger on switch. Be sure switch is off when
insert battery pack.
19. Disconnect appliance – Disconnect the appliance from
the battery pack when not in use, before servicing, when
changing accessories.
20. Do not force the tool – It will do the job better and with
less likelihood of injury if it is used at the rate for which it
was designed.
21. Do not overreach – Keep proper footing and balance at
all times.
22. Stay alert – Watch what you are doing. Use common
sense. Do not operate the trimmer when you are tired, or
under the influence of alcohol or drugs.
23. Store idle tools indoors – When not in use, tools should
be stored indoors in a dry and high or locked-up place out
of the reach of children.
24. Maintain tools with care – Follow instructions for
lubricating and changing accessories. Inspect the trimmer
periodically and replace if damaged. Repair the trimmer
only at an authorized service facility. Keep handles dry,
clean, and free from oil and grease.
25. Checked for damaged parts – Before continuing to use
the trimmer, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform its intended function. Check for
the alignment of moving parts, binding of moving parts,
breakage of parts, mounting, and any other condition
that may affect the trimmer's operation. A guard or other
part that is damaged should be properly repaired or
replaced by an authorized service center unless indicated
elsewhere in this manual.
ADDITIONAL SAFETY INSTRUCTIONS
FOR GRASS TRIMMER
1. Keep guards in place and in working order.
2. Keep hands and feet away from the cutting area.
m
WARNING!
Never use steel blades or other devices.
Use of any other accessories or attachments will increase the
risk of injury.
m
CAUTION!
The safety guard is critical to the safety
of the operator and the safety of people standing within a safe
distance of the trimmer. The safety guard keeps the trimmer
in good working order and must always be in place during
operation.
• Do not try to stop the trimmer blade with your hands.
Always let it come to a stop by itself.
m
WARNING!
After switching off the tool, the cutting
blade continues to rotate for a few seconds.
• Only use the original type of nylon grass blades. Do not
under any circumstances use metal line or nylon line instead
of the blade.
• Do not use the tool to cut grass which is not on the ground.
For example, do not cut grass growing on walls or rocks.
• Do not switch on the tool in an enclosed or poorly ventilated
space or in the presence of flammable and/or explosive
substances such as liquids, gases and powders.
• Only cut during broad daylight or with adequate
artificial light.
• Check that all grass cuttings and dirt have been removed
from the ventilation vents.
• Do not cross roads or gravel paths while the tool is
still running.
• When the tool is not in use, store it in a dry place and out of
reach of children.
• After use, remove the battery and check for damage. If you
have any doubt about the condition of the tool, contact an
authorized service center or call the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
• Only use the tool according to the instructions given
in this manual.
• Check regularly that the screws are tight.
• Do not try to repair the tool or access internal parts.
Contact an authorized service center or call the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
B Charger
Safety Instructions
NOTE: This unit is tool only. The battery and the charger are
not included. They must be purchased separately.
Model 24V-GT10-CT-RM is compatible with the 24V iON+
System batteries and chargers. See page 14 for more
information.
We pay a great deal of attention to the design of every battery
pack to ensure that we supply you with batteries that are safe,
durable and have a high energy density. The battery cells have
a wide range of safety devices. Each individual cell is initially
formatted and its electrical characteristic curves are recorded.
This data is then used exclusively to be able to assemble the
best possible battery packs.
Despite all the safety precautions, caution must always be
exercised when handling batteries. The following points must
be obeyed at all times to ensure safe use. Safe use can only be
guaranteed if undamaged cells are used. Incorrect handling of
the battery pack can cause cell damage.
