12
• Regular cleaning and maintenance of you grass trimmer will
ensure efficiency and prolong the life of your machine.
• After each cutting operation, take apart and clean out the
grass and soil from the whole trimmer and guard.
• During operation, keep the air vents clean and free
from grass.
• Only use a cloth soaked with hot water and a soft brush to
clean the grass trimmer.
• Do not spray or wet the appliance with water.
• Do not use detergents or solvents as these could ruin
the trimmer. The plastic parts can easily be damaged by
chemical agents.
• For repairs which have not been explained in these
instructions, contact an authorized service center at
1-866-SNOWJOE (1-866-766-9563).
IMPORTANT! Repairs, maintenance, and adjustments to this
power tool should be performed only by a qualified repair
person using only identical replacement parts. This will ensure
that the safety of the product is maintained. Contact your
authorized Snow Joe
®
+ Sun Joe
®
dealer or call the
Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563) for assistance.
Replacing the Trimmer Blade
NOTE: The trimmer blade may wear out over time with
extended use. Replace the worn blade immediately with the
provided replacement blades. Do not use other materials
such as steel blades, wire, string, rope, etc as they can break
off during cutting and become a dangerous missile causing
serious injury.
Additional replacement blades (Model GT10-GBLD-20PK) are
also available at sunjoe.com for purchase.
1. Stop the unit and remove the battery from the battery
compartment before changing the trimmer blade.
2. To remove the worn blade, first move the blade inward as
shown until the blade peg is in the larger hole of the blade.
Then the blade should be able to be detached from the
machine easily (Fig. 12).
3. Fit the blade peg in to the larger hole of the new blade,
and pull the new blade outward until the peg is locked in
the smaller hole of the new blade (Fig. 13).
Proper Care for B Charger
m
WARNING!
To reduce the risk of injury, always unplug
the charger and remove the battery pack from the charger
before performing any maintenance task. Never disassemble
the battery pack or charger. Contact your Snow Joe
®
+
Sun Joe
®
dealer or the Snow Joe
®
+ Sun Joe
®
customer
service center for ALL repairs.
1. To reduce the risk of injury and damage, never immerse
your battery pack or charger in liquid or allow any liquid to
flow inside these components.
2. Clean out dust and debris from charger vents and
electrical contacts by blowing with compressed air.
3. Use only a soft, clean and dry brush to clean the battery
pack and charger, keeping away from all electrical
contacts. Certain cleaning agents and solvents are harmful
to plastics and other insulated parts. Some of these
include gasoline, turpentine, lacquer thinner, paint thinner,
chlorinated cleaning solvents, ammonia and household
detergents containing ammonia. Never use flammable
or combustible solvents around battery packs, battery
chargers or tools.
4. The iON+ 24VCHRG-QC and 24VCHRG-DPC lithium-ion
battery chargers have no serviceable parts.
Storage
Follow these recommendations for storing the grass trimmer .
• Clean the grass trimmer thoroughly before storing.
• Store the trimmer in a stable and safe location out of the
reach of children. Keep the trimmer in a dry place where the
temperature is not too hot or too cold.
• Do not store the grass trimmer resting against the floor.
Hang it by the upper handgrip so that the guard does not
touch anything. If the guard rests against a surface, its
shape and dimensions could be permanently altered, and
could render the machine unsafe to use.
Fig. 12
Worn trimmer
blade
Blade peg
Larger hole
Fig. 13
New trimmer
blade
Blade peg
Smaller hole
