background image

12

2. 

Check that the mains voltage is the same as that marked 

on the rating plate of the battery charger. Then, insert 

the charger's plug into the electrical wall outlet. When 

you plug in the charger, the light on the charging plug will 

illuminate red. When fully charged, the light will illuminate 

green (Fig. 14).

3.  Place the battery pack into the charger by sliding the 

pack as shown to lock it into position. When you insert 

the battery into the charger, the light on the charging base 

will illuminate red to indicate that the battery is charging 

(Fig. 15).

4.  When the charger base light turns green, the battery is 

fully charged (Fig. 15).

NOTE: If the charger plug light remains green while the charger 

base light alternately flashes red and green, this indicates a 

temperature abnormality (i.e. that the battery pack is either too 

hot or too cold).

5.  A fully discharged pack with an internal temperature in 

the normal range will fully charge in 70 mins (between 

32ºF/0ºC and 113ºF/45ºC). Heavily cycled battery packs 

may take longer to charge completely.

6.  If the light indicators does not come on at all, check that 

the battery pack is fully seated into the bay. Remove 

the pack and reinsert. If the problem persists, contact 

an authorized Snow Joe

®

 + Sun Joe

®

 dealer or call 

the Snow Joe

®

 + Sun Joe

®

 customer service center at 

1-866-SNOWJOE (1-866-766-9563)

 for assistance.

7.  When charging is complete, remove the battery from the 

charger by pulling the push lock button and sliding the 

battery backward to unlock it from the charger (Fig. 1

6

).

8.  Timely recharging of the battery will help prolong the 

battery's life. You must recharge the battery pack when 

you notice a drop in the equipment's power.

IMPORTANT! Never allow the battery pack to become fully 

discharged as this will cause irreversible damage to the 

battery. 

Charging a Hot or Cold Battery Pack

A red and green flashing indicator light on the charger base 

indicates that the battery pack temperature is outside the 

charging range. Once the pack is within the acceptable 

range, normal charging will take place and the red light will 

be continuous. Hot or cold battery packs may take longer to 

charge. 

Fig. 13

Battery pack

Push 

lock 

button

Fig.14

red

Charging

green

Charged

Fig.15

red

Charging

green

Charged

Temperature abnormal

Green

Plug light

Flashing  

red/green

Base light

Fig. 16

Push lock 

button

Содержание Sunjoe 20ViON-CS10

























Отзывы: