SNOWJOE iON8024-CT, Руководство оператора

Страница: 15 / 28

15
To Engage Drive
1. In the control panel, select the appropriate speed for a
comfortable pace (Fig. 21).
NOTE: There are 3 forward speeds. Press once for
low speed (green), press twice for standard speed (yellow),
and press three times for high/max speed (red).
To repeat the sequence again, press as needed to adjust.
2. Squeeze drive trigger against the left-handle and the snow
blower will move. Release it and drive motion will stop
(Fig. 22).
IMPORTANT! Forward speed can be changed without
releasing the drive trigger (left-handle).
m
WARNING!
DO NOT change direction from forward
to reverse with drive trigger (left-handle) engaged. Unit
must come to a complete stop before changing direction.
To Engage Auger/Snow Removal (Fig. 23)
NOTE: When the unit is switched on, the walking speed
indicator light will be green. Press once for low speed, and the
light will remain green.
NOTE: Auger trigger should be engaged before drive trigger
when throwing snow.
1. Press the safety button then engage auger trigger. Auger
will start spinning.
2. In the control panel, select the appropriate speed to match
the snow conditions as well as clearing at a comfortable
pace.
NOTE: There are 3 forward speeds. Press once for
low speed (green), press twice for standard speed (yellow),
and press three times for high/max speed (red).
To repeat the sequence again, press as needed to adjust.
3. Engage drive trigger. The snow blower will move and start
plowing snow.
IMPORTANT! The auger will not engage when in either
REVERSE or XPORT mode.
Stopping the Machine
1. Release both drive trigger and auger trigger. Drive motor
and auger will stop (Fig. 24).
2. Wait for all moving parts to come to a complete stop.
3. Disengage safety switch.
4. Turn power switch to OFF position and remove key.
Fig. 21
Reverse
Forward
Low | Standard | High
Fig. 22
Drive trigger
(Left-handle)
Fig. 23
Drive trigger
(Left-handle)
Auger trigger
(Right-handle)
Safety
button
3
3 speed selector
4
1
2
Fig. 24
Drive Trigger
(Left-handle)
Auger trigger
(Right-handle)
Safety key/
Power switch
Safety switch