SNOWJOE iON8024-CT, Руководство оператора

Страница: 14 / 28

14
Pre-Start
1. Charge batteries – See Charger Operation section on
page 10.
2. Check function of triggers – If triggers cannot engage or
disengage properly, adjust or repair before operation.
3. Check Skid Shoes – Check and adjust skid shoes (See
Assembly section on page 9; fig. 7).
Emergency Stop
Immediately release both triggers to stop unit in an emergency.
Disengage safety switch, remove key and wait for all rotating
parts to stop before leaving operator’s position.
Operation
m
WARNING!
Failure to follow instructions could result
in personal injury and/or damage to snow blower. DO NOT
attempt to start your snow blower at this time. Read entire
operator manual first.
See page 11 for all controls and features.
m
WARNING!
Keep the area to be cleared free of stones,
toys or other foreign objects that the rotor blades might pick
up and throw. Such items could be covered by snow and are
easy to overlook, so be sure to conduct a thorough inspection
of the area before beginning work.
Starting the Machine
IMPORTANT! Disengage safety switch and release both
triggers before turning power switch to ON position.
1. Open the battery compartment cover and slide two
battery packs down until they both click and lock into
position (Fig. 18). Close the cover.
2. Rotate the safety switch clockwise and pull up the safety
switch. Drive motor will not yet run (Fig. 19).
3. Insert key and turn power switch to the ON position. The
side LED windows and control panel buttons will glow
(Fig. 19).
To Engage Auger
NOTE: Auger trigger should be engaged before drive trigger
when throwing snow.
1. To engage the auger, press the safety button then squeeze
the auger trigger against the right-handle (Fig. 20).
2. Release auger trigger to stop the auger.
IMPORTANT! DO NOT overload unit capacity by attempting to
clear snow at too fast a rate. Use slow speed to clear deep or
hard packed snow.
Fig. 18
Battery
packs
Battery
compartment
cover
Fig. 19
Safety key/
Power switch
Safety
switch
Fig. 20
Safety button
Auger trigger
(Right-handle)
1
2