SNOWJOE iON15SB-CT-RM, Руководство оператора

Страница: 10 / 20

10
5. Slide the upper crank rod into the top of the crank rod
connector (Fig. 12).
6. Align the holes on the connector with the holes on
the upper crank rod, insert the thumbscrew and turn
clockwise to secure it (Fig. 13).
Discharge Chute Assembly
1. Position the chute deflector over the discharge chute
and align them with the deflector bolts, washers and the
deflector knobs (Fig. 14).
2. Secure the deflector bolts, washers and knobs. Make sure
the knobs are tightened (Fig. 15) .
3. Turn the chute control crank clockwise to ensure the
discharge chute and deflector are in position.
Battery Pack Operation
NOTE: In order to operate this cordless snow blower, you will
need iONMAX 40V System batteries and chargers. See page 17
for battery options and specifications, or visit snowjoe.com.
The equipment is powered by a lithium-ion battery. The battery
pack is completely sealed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read off the
battery charge level from the LEDs of the battery indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is flat. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
NOTE: If the charge level button does not appear to be
working, place the battery pack on the charger and charge as
needed.
Fig. 12
Upper crank rod
Lower
crank rod
Crank rod
connector
Fig. 13
Thumbscrew
Fig. 14
Deflector knob
Deflector bolt
Washer
Fig. 15
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
Light Indicators Lights