3. Replace the worn belt with a new belt (Fig. 2
6
).
4. Place the left side cover back into position and refasten
the five screws.
Replacing the Scraper Blade
m
WARNING!
Make sure to turn off the switch and
remove the battery before performing any maintenance task on
your hybrid snow shovel.
1.
Turn the hybrid snow shovel over. Using a drill or
screwdriver, remove the four screws that secure the
scraper blade to the base of the unit (Fig. 27).
2.
Remove the old scraper blade (Fig. 28).
3. Install the new scraper blade and fasten it securely to the
housing with the four screws (Fig. 29).
Lubricating the Hybrid Snow Shovel
This hybrid snow shovel does not need lubrication. All
bearings are lubricated at the factory for the life of the product.
Storage
1.
Examine the hybrid snow shovel thoroughly for worn,
loose, or damaged parts. Should you need to repair or
replace a part, contact an authorized Snow Joe
®
+
Sun Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
2. Remove the battery from the hybrid snow shovel
before storing.
3.
Store the hybrid snow shovel indoors in a locked, dry
place out of the reach of children to prevent unauthorized
use or damage.
B Charger Off-Season Storage
1.
Do not expose your battery pack or charger to water,
rain or allow them to get wet. This could permanently
damage the charger and the battery pack. Do not use oil
or solvents to clean or lubricate your battery pack as the
plastic casing can become brittle and crack, causing a
serious risk of injury.
2.
Store the battery pack and charger at room temperature
away from moisture. Do not store in damp locations where
corrosion of terminals may occur. As with other battery
pack types, permanent capacity loss can result if the pack
is stored for long periods of time at high temperatures
(over 120ºF/49ºC).
3.
EcoSharp
®
LITE iBAT40-LTE lithium-ion battery packs
maintain their charge during storage longer than other
battery pack types. As a general practice, it is best to
unplug the battery charger and remove the battery pack
when they are not in use. Recharge the battery pack every
6 months to 50% capacity (2 lights on) during off-season
storage to maintain optimal battery performance.
Fig. 26
Belt
Fig. 27
4 screws
Drill
Fig. 28
Scraper blade
Fig. 29
Scraper blade
4 screws
16
Содержание iON13SS-LTE-HYB
Страница 20: ...snowjoe com...
