SNOWJOE iON13SS-HYB, Руководство пользователя

Страница: 15 / 20

15
4. Disassemble the right side cover by removing the five (5)
screws that hold it in place (Fig. 20 ).
5. Secure the auger and remove the auger assembly nut
(Fig. 21).
6. Remove the auger axle set (Fig. 22).
7. Remove the old auger from the housing (Fig. 23).
8. Install the replacement auger by following the above steps
in reverse order (Fig. 24 ).
Replacing the Belt
m
WARNING!
Make sure to turn off the switch and
remove the battery before performing any maintenance task on
your hybrid snow shovel.
1. Disassemble the left side cover by removing the five (5)
screws that hold it in place (Fig. 17).
2. Remove the old belt from the body by slowly turning the
auger while lifting the belt (Fig. 25).
Fig. 20
Fig. 21
Auger assembly nut
Fig. 22
Auger axle set
Fig. 23
Auger
Fig. 24
Fig. 25
Belt
Auger