background image

7

Maintenance, Environment, 

Storage 

WARNING.

 

Switch off and remove the battery before 

carrying out any maintenance on the tool. 

 

Lubrication 

No Lubrication is necessary, the bearing area is sealed. After 
each use, carefully clean the blower with a brush or rag. Clear 
any debris from around the moving parts.

General Inspection

• Regularly check that all the fixing screws are present and 

tight. They may vibrate loose over time.

• Keep the tool's air vents unclogged and clean at all times.
• Remove dust and dirt regularly.
• Cleaning is best done with compressed air or a rag.
• Never use caustic agents to clean plastic parts.

CAUTION. 

Do not use cleaning agents to clean the 

plastic parts of the tool. A mild detergent on a damp cloth 
is recommended. Water must never come into contact 
with the tool.

When the time comes to dispose of this product please 
consider the environment and take it to a recognised recycling 
facility instead of disposing with general household waste.

The blower uses a Lithium-Ion (Li-ion) battery which must be 
disposed of properly.

Call your local council, civic amenity site, or recycling centre 
for information on the recycling and disposal of electrical 
products and Lithium-Ion (Li-ion) batteries.

Storage

Store the tool, instruction manual and accessories in a secure, 
dry place. In this way, you will always have all the information 
and parts ready to hand.

Never store the Blower with a flat or worn down battery. 

The battery should ideally be stored between 10ºC (50ºF) 
and 24ºC (75º F).

Service

If your Cordless Leaf Blower requires service or maintenance, 
please call 1-866-766-9563 for assistance.

Model and Serial Numbers

When contacting the company or reordering parts, you 
will need to provide the model and serial numbers of your 
product. These are found at the bottom of your Cordless Leaf 
Blower. Copy these numbers into the space provided below.

Record the following numbers from the housing or handle of your  
new product:

B   J   6    0    1   C

Model #:

Serial #:

Charge Position

Free  

 

 

Off  

Charging  

 

Flash  

Fully Charged  

 

On  

Over Heat Warning  

Off  

Battery Malfunction 

Off  

On

On

On

Flash

Flash

Green Light

Red Light

Содержание BJ601C









Отзывы: