SnowEx SP-2400, Руководство владельца/оператора

Страница: 28 / 36

© Trynex International 2008 L1186 8 — 28
Operating the Spreader
(continued)
WARNING PROTECTION
• If audible beeping occurs, read display to identify problem. If display reads “OL” (overload) or “OH” (overheat). Shut controller down and
carefully clear jammed auger. If display reads “E1“ this means there is a dead short in system. Do not use until problem is cor rected. If
display reads “E 0” this means that the motor is not getting any power. Check all connections. If display reads “LB” the vehicl e battery
is extremely low (possibly caused by a poor or corroded connection) and could damage the system.
• If there are any problems while operating the spreader, refer to Troubleshooting Guide.