4
16992210 Rev A
MOUNT/DISMOUNT INSTRUCTIONS
Snowplow Mounting (fig. above)
1.
Check that the pins are fully retracted. The foot
pedal should be pushed towards the truck and will
lock in the retracted position.
2.
Drive in to the plow so that the cross bar on the
mount engages with the receiver notch on the plow.
3.
Pull the foot pedals away from the truck to release
the pins.
4.
Push up on the lift frame to engage the pins. To
verify the lift frame is fully connected, check to see
that the gold pins are visible from each side. Insert the
lock pin through the foot pedal and pedal linkage.
5.
Connect the hydraulic control connectors.
Snowplow Dismount (fig. above)
1.
Put the plow in float by holding the down button for
1 second.
2.
Press down on the chain lift to retract the lift cyl-
inder. The chain must have slack for ease of plow
removal.
3.
Push on the foot pedals and the lift frame towards
the vehicle simultaneously. The pins will retract and
the lift frame will rotate forward to rest on A-frame.
6.
Disconnect the hydraulic connectors
7.
Back away from the snowplow
DISMOUNTED PLOW
MOUNTED PLOW