SNOWDOG COMPACT B13ME-WR, Руководство пользователя

Страница: 5 / 16

5
V
Informational label with serial no.
WARNING labels #1 and #2.
WARNING label #3.
Dual-sided WARNING label #4.
8 Packaging
SNOWDOG delivery set contents:
1. SNOWDOG — 1 pc.
2. Support bracket — 1 pc.
3. Battery — 1 pc.
4. Eye bolt — 1 pc.
Owner’s documentation:
5. Owner’s Manual — 1 pc.
6. Warranty services agreement — 1 pc.
7. Operator’s engine manual — 1 pc.
V
NOTE
Spare parts and accessories can be ordered
from your dealer.
9 SNOWDOG set-up
9.1 Installation of the cover support bracket
Prior to startup of SNOWDOG install the cover support
bracket, which is supplied with SNOWDOG. You will need a
Philips screwdriver for that (not included).
Unscrew the cover fi xing screw in the top part of the
chassis.
Insert the bracket under the cover, aligning the screw
holes with the holes in the chassis. If necessary, bracket may be
slightly bended to align the holes.
Screw the bolts, previously unscrewed from the chassis, so
that the bracket would be places between chassis and the cover,
and would separate hot muf fl er from the cover.
Then put fabric cover on the SNOWDOG. When you put on
the cover make sure that there is a distance between cover and
muf fl er of not less than 4 inches (100 mm). If the distance is less
than 4 inches (100 mm), bend the cover bracket.