324-128
Drop Kit
Installation
Instruction
3
|
P a g e
SnowBear
®
Drop Kit Installation - 324-128
INSTALLATION:
The SnowBear® Drop Kit is designed to quickly and easily install on your SnowBear® SP115 Plow Assembly.
If installed on your vehicle, the plow assembly does not need to be removed. The 2" Hitch Receiver weldment
can remain while the installation is performed.
Step 1
Remove the 1/2"-13 hex bolts & nuts (4 per side) that fasten the Left Hand and Right Hand Winch Arms to the
Winch Assembly with 3/4" ratcheting wrench/socket(s) and/or open/box end wrench(es).
Caution!!
It is recommended that 2 people hold the Winch Arm & A-Frame assembly as it will drop after the bolts
are removed OR Have a means to prop the assemblies up to maintain position.
1/2-13 Hex
Bolts & Nuts
Winch Motor Assembly
2" Hitch Receiver
Weldment
