While pushing the pushpin on the tip of the main
pole (middle) over the shelter's fabric, pull it out
from the grommet on the ceiling of the shelter,
and remove the main pole (middle).
Remove each hook and buckle of the inner room
and take the inner room out of the shelter.
1
Remove the Velcro tape on the sub-pole, pull
the tip out of the shelter's grommet, and remove
the sub-pole from the shelter.
3
4
Please ensure two people hold the main pole
(front and back) and gently tilt the shelter in the
same direction.
5
Pull out the pegs securing the forked end rope,
and remove the forked end rope from the end of
the main pole (front and back). Then, remove
the main pole (front and back) from the shelter.
6
Please pull out the peg that secures the rope of
the bottom and corner of the shelter. If the
ground sheet is used, remove it from the shelter
at this time.
2
12
Disassembling should be done in the reverse order of setup. Make sure there is nothing inside the inner room
and the shelter before beginning. It will be easier to roll the fabric up if you slightly open the zipper at the inner
tent entrance.
Push it over the fabric of the shelter.
Push Pin
How to Disassemble :
Please make sure to disassemble with at least two people.
