11
Inner Room
Inner Room Buckle
Logo Print
Loop Tape
Hook at the Corner of the
Inner Room Roof
Corner Ring on the Bottom
Ring at the Roof Corner of the Shelter
Inner Room Bottom Corner Hook
Please connect the buckle on the ceiling of the inner
room to the buckle on the shelter. (2 locations)
* Please be careful not to twist each belt.
2
Attach the hooks at the bottom corner and the roof corner of the inner room to the ring in the same position
on the inside of the shelter, then adjust the belt's length. There is a red belt on the bottom of the inner
room's long side and a black belt on the short side. Please ensure the color of the belt with the hook and
the ring matches when installing.
* Be careful not to twist each belt.
3
Adjust the belt's length attached to the inner room buckle and hook to the shelter to set up the inner room.
Please adjust the inner room ceiling so that it is slightly looser than the shelter's ceiling. If you set up the
inner room with too much tension, the shelter's shape will be skewed.
4
Spread the inner room on the ground sheet with
the bottom fabric positioned as shown in the
figure. The bottom of the inner room is a trapezoid
shape. Make sure the long side with the logo print
faces the inside of the shelter.
A loop belt can be attached to the buckle on the shelter ceiling where the inner
room is attached. It can be passed between the main pole (front and back) and
the main pole (middle). Ensure the tension of the loop belt is slightly loose from
the ceiling of the shelter. If you set up the loop belt with too much tension, the
shelter's shape will be skewed.
* The inner room and loop belt cannot be used together in the same place.
* Please use the loop of the loop belt for things within 1 kg (2.2lbs).
* Connect the loop belt and avoid twists.
1
Attaching the Loop Belt
How to Install the Inner Room
