10
For GS-220
Only use designated exclusive Snow Peak fuel canisters.
Do not use any other fuel canisters.
The fuel canister contains liquefied petroleum gas. If it falls
on its side, is turned upside down, or is attached on an
angle, liquid gas will be forcefully ejected, which is
extremely dangerous. Only connect after ensuring that
there is no fire in the vicinity. The threading that connects
the canister and the stove is extremely important.
Overtightening the canister or attaching it on an angle will
cause gas leakage and additional damage. Using both
hands will overtighten the connection, damaging the
connector or the canister. Always tighten with one hand
only.
(1) Turn the heat adjustment
knobs on the front of the unit
clockwise and confirm that the
gas valves are closed.
(2) Hold the fuel canister vertically in your hand, and line
up the connector with the threading.
(3) Steady the fuel canister with one
hand, and slowly turn it clockwise
(viewed from the bottom) with the
other hand until you have confirmed
that it has gradually tightened and
secured. Release your hands.
(4) To detach a fuel canister, follow the above procedure in
reverse.
5. Attaching and detaching the fuel canister and the stove
GS-230
Only use designated exclusive Snow Peak fuel canisters.
Do not use any other fuel canisters.
Always hold the fuel canister tightly with one hand, and
operate the lock bar with the other hand. The canister could
fall if not attached to the stove, and the impact of falling or
the load on the connection tube from the weight of the
canister could cause damage. Hold on to the canister and
do not let go while performing the following tasks. If the
canister falls while you are connecting it and impacts the
tube, the tube or connector may be damaged, which could
cause gas leakage.
In the unlikely event that gas leakage occurs, stop use and
request repairs.
Take care that your fingers, etc. don’t get pinched in the
lock parts while performing these tasks.
Do not allow any impact to the tube or connector.
(1) Lower the lock bar and open the locks on the left and
right. Only open and close the locks with the lock bar.
Forcefully opening or closing the lock arm could prevent
the locks from holding fuel canisters properly.
(2) After opening the lock arm, gently raise the lock bar to
open the lock arm.
Heat adjustment knob
Lock bar
Lock arm
