Snow Peak FES-195, Руководство по эксплуатации продукта

Страница: 31 / 32

● A combination of polyester fabric is used for this product. Taking the material characteristics into consider-
ation, we adopted processing and color patterns that will result in less color migration. However, depending on
storage conditions, slight color migration may still occur. Do not store the product while it is wet to prevent this
color migration. ● Before storage, the product should be cleaned and dried sufficiently. If the product is stored
when wet, the build-up of mold, bad odors, color migration, and material deterioration will occur. Dry the product
sufficiently in a breezy and shaded area and clean the surface with a soft brush before storing. ●Do not turn the
product upside down with the poles through it. Doing so may result in pole breakage or fabric damage. ● Clean
and dry the surface of the poles before storing. If stored when wet, corrosion may occur, resulting in strength
deterioration. Keep the joints clean and apply a small amount of silicone lubricant; applying an excessive
amount of lubricant will stain the cloth. Ensure that the cords inside the poles are not pulled unnecessarily. ●
When storing the poles, please fold them from the center outwards.(Figure A) ●Store the product in a well-venti-
lated area, away from heat and moisture. ●Using the zipper
when it is covered with mud, sand or dust may cause wear or
damage.
Clean the zipper with a brush before use. Apply small amounts of silicone lubricant to the fastener regularly to
allow for smooth movement. Do not apply excessive amounts of lubricant as it will leave stains on the cloth. ●
Slight damage to the cloth can be mended with repair tape that can be purchased from your local outdoor gear
retailer. Refer to the product instructions for the correct use of such repair tape. ●Depending on the conditions
during use, the tent material may deteriorate over a wide area, losing its durability and becoming irreparable. ●
Seam tape is pressure-capped at a temperature setting that prevents damage to the PU coating. However, it
may peel off as it is used repeatedly. If peeling is found, set iron at a low temperature and reattach only the
peeling sections. Be aware that excessive heat will discolor or accelerate the deterioration of the fabric. If the
PU coating is completely peeled off, it may be impossible to repair. ●Sap cannot be easily removed. Do not set
up this product under trees that frequently drop sap. The fabric or coating may be permanently damaged if the
sap is forcibly removed with a solvent, etc. If the Pole is broken while the tent is in use, as an emergency
treatment, use a repair pipe or splint, and fix it with vinyl tape. Or disassemble the tent for repair.
30
●If professional repair is necessary, please contact the dealer where you purchased the product or Snow Peak
Customer Service. ●Please dry and clean the product before sending it for repair. ●Please attach a memo onto
the damaged area of the product.In the memo, include details explaining the circumstances that led to the
damage. ●The cost of repair will be determined as follows: 1. If the damage is subject to warranty, Snow Peak
will cover the transportation cost (both ways) and repair cost. / 2. If the damage is not subject to warranty, the
customer will cover the transportation cost (both ways) and repair cost.
Regarding repair
Snow Peak makes every effort to ensure our products are free from defects or flaws for proper function and
longevity. If you feel this product is defective or needs repair, please contact Snow Peak or go to the Snow
Peak dealer where you purchased this product.If the cause is defective manufacturing, we will repair or
replace the product free of charge.In all other cases, we will repair it at an appropriate price.The decision to
repair or replace is at our discretion.We may not be able to repair or replace this product in the following cases.
1.Failure due to improper handling described in this manual. / 2.Material deterioration from normal aging of the
product. / 3.Failure due to modification or careless handling. / 4.Failure due to unforeseen accidents. /
5.Failure due to defects outside of the manufacturing process. / 6.Failure due to dust or rust. / 7.Defects or
damage due to product dismantling. / 8.Deformation or defects due to dropping or other physical shock. /
9.Defects due to deterioration, damage, or failure of consumable parts. / 10.Failure due to use with other
manufacturer’s products.
Quality assurance
(Figure A)
Maintenance