Snorkel TB42J Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 68

Snorkel TB42J Скачать руководство пользователя страница 16

Chapter 3 – Safety

12

TB42J – 0172310

Never remove the fuel cap or fill the fuel tank while the
engine is running or hot. Never allow fuel to spill on hot
machine components.

Maintain control of the fuel filler nozzle when filling the
tank. Spilled fuel is a potential fire hazard.

Do not overfill the fuel tank. Allow room for expansion.

Clean up spilled fuel immediately.

Tighten the fuel tank cap securely. If the fuel cap is lost,
replace it with an approved cap from Snorkel. Use of a
non-approved cap without proper venting may result in
pressurization of the tank.

Never use fuel for cleaning purposes.

For diesel engines, use the correct fuel grade for the
operating season.

A

Caution

Engine coolant escaping under pressure can cause
serious burns. Shut the engine off and let it cool
before removing the radiator cap.

Let the engine and radiator cool before adding coolant.

Placards and Decals

The aerial platform is equipped with placards and decals
that provide instruction for operation and accident pre-
vention. Do not operate the aerial platform if any plac-
ards or decals are missing or not legible.

«
...
14
15
16
17
18
...
»

Содержание TB42J





































































Отзывы:

Нет отзывов