Snorkel S2770RT, Руководство оператора

Страница: 29 / 56

Chapter 7 – Prestart Inspection
S2770RT IS – 0102094 25
raised approximately 1 ′ (0.3 m) the machine should
travel in low speed only. To operate in high speed the
platform must be stowed.
Emergency Stop
To test the emergency stop button from the upper controls:
1. Push the emergency stop button (refer to Figure 7.15)
inward to block hydraulic power to the upper controls.
2. Test the upper controls to ensure they no longer
operate.
Horn Button
The horn button is operational when the pressure in the
air tank is sufficient to sound the horn.
With the engine running, press the horn button to ensure
that it sounds to warn personnel in the area.
Placards and Decals
To inspect the placards and decals:
1. Inspect all safety and operational placards and
decals. Make certain they are in place, in good con-
dition, and are legible.
2. Clean the placards and decals with soap and water,
and a soft cloth if the words or pictures cannot be
seen.
A
Caution
Solvents may contain hazardous ingredients. Follow
the manufacturer’s label for proper use and dispos -
al. Wear protective gloves and splash-proof safety
glasses when using solvents.
3. Remove wet paint overspray with a natural biode-
gradable solvent and a soft cloth.
4. Replace any missing, damaged, or illegible placards
or decals before operating the aerial platform.
Placard and decal kits are available from Snorkel.
The safety related placards and decals are illustrated on
the following pages.