Snorkel S2770RT, Руководство оператора

Страница: 17 / 56

S2770RT IS – 0102094 13
The aerial platform is equipped with several gauges to
monitor the condition of the machine before and during
operation.
Fuel
The fuel tank is translucent. The amount of fuel in the
tank can be gauged by opening the door on the front of
the machine (refer to Figure 5.1) and looking at the tank.
Figure 5.1 – Front of Chassis
Note
Do not run a diesel fuel tank empty. Air in the fuel line
makes the engine hard to start.
Engine Oil
The engine oil level is measured with a dipstick. The dip-
stick is the only way to accurately determine the engine
oil level. The engine oil level should always be between
the add and full marks on the dipstick.
Hydraulic Fluid Filter Gauge
The fluid filter gauge (refer to Figure 5.2) is located on the
return line filter on the left side of the reservoir. The res -
ervoir is behind the door on the left side of the turntable.
y
During high pump flow situations, the gauge indicates
the condition of the filter.
y
When the needle on the gauge is in the red zone, its
time to change the filter.
Figure 5.2 – Hydraulic Fluid Filter Gauge
Hydraulic Fluid Level Gauge
The hydraulic fluid level gauge is on the front of the
hydraulic oil tank (refer to Figure 5.3) located behind the
doors on the left side of the chassis.
Figure 5.3 – Hydraulic Tank
Only read the fluid level when the scissor structure is
completely lowered. Otherwise, the lift cylinders become
large reservoirs for hydraulic oil and the oil level in the
tank will be low. The fluid should be between the Full
and Add lines.
Bubble Levels
Bubble levels (refer to Figure 5.4) are located on the
right front and left rear of the chassis. When the bubbles
are centered, the chassis is level and the platform can
safely be raised.
Figure 5.4 – Bubble Level
Chapter 5 – Gauges and Displays
Fuel Level