
Chapter 8 – Prestart Inspection
S1930E/S1932E/S2632E – 1360460
33
0372000
Right Side
0361259
Rear
0070901
(Inside Hydraulic Tray)
0361259
PROPER USE OF SAFETY PROP
TO STORE SAFETY PROP
1. Remove all material from platform.
2. Raise platform until the open height is wide
enough to position the safety prop.
3. Place safety prop in the proper position.
4. Remove hands and arms from scissors area.
5. Lower platform until scissors are supported by
safety prop.
1. Raise platform until the open height is wide
enough to position the safety prop.
2. Place the safety prop in the storage position.
0361259
Death or serious injury
might result if safety prop
is not used and/or
properly positioned. Use
safety prop at all times
when servicing machine
with platform raised.
Proper position for safety prop use
0372000
DEATH OR SERIOUS INJURY CAN RESULT FROM TIPPING OVER.
TO KEEP FROM TIPPING THIS MACHINE OVER FOLLOW THESE RULES.
OTHER ACTIONS CAN ALSO CAUSE THIS MACHINE TO TIP OVER
NOTE: STUDY THE OPERATOR'S MANUAL
BEFORE OPERATING THIS MACHINE.
0372000
DO NOT
DO NOT
DO NOT
DO NOT
DO NOT
override safety devices.
overload the machine.
stand or sit on guardrails.
attach ropes or chains to guardrails.
carry loads outside the railing or use
as a crane.
DO NOT
use this machine without the railings and the
entry gate, chain or bar in place. You could fall
out and hurt or kill yourself.
DO NOT
use this machine if it is not working right, or if
any part of it is damaged, worn, or missing.
An accident could cause injury or death.
DO NOT
DO NOT
let an untrained or unauthorized person use this
machine. When you leave the machine unattended,
remove the key, or turn off the battery switch on the base
of the machine and lock the battery switch in the off
position.
replace components critical to machine stability, such as
batteries and wheel equipment, with lighter weight or
DO NOT
DO NOT
DO NOT
ride platform while machine is on a truck, fork lift
or other device.
use ladder, scaffold, or other means to increase
size or platform height.
use with damaged tires or wheels.
DO NOT RAISE OR DRIVE AN ELEVATED
PLATFORM ON
SOFT OR UNEVEN
SURFACES
DO NOT RAISE OR DRIVE AN ELEVATED
PLATFORM ON A
SLOPE
GO NO CLOSER THAN 4 feet (1.2m)
to
ANY
DROP OFF
OR HOLE
4 FT
OK
1.
3.
2.
ALARM MEANS TIPOVER DANGER!
LOWER PLATFORM IMMEDIATELY
TO AVOID
TIPOVER HAZARDS
USE ON
FLAT, LEVEL, AND
SOLID SURFACES
ONLY
4 FT
OK
ELECTRICAL SHOCK CAN KILL YOU
This machine is not electrically insulated. Maintain 10 feet minimum
clearance from electrical power lines and apparatus.
Allow for platform sway, rock, or sag. If voltage is 300 V to 50 kV stay at least
10 feet (3.1m) away. If voltage is more than 50 kV talk with your supervisor or
read the Operator's Manual on this machine for safe distances.
This machine will not protect you from shock.
DO NOT RAISE THE PLATFORM
IN WIND ABOVE 28 MPH (12.5 M/S)
SERIAL
NUM BER
M O DEL
NUM BER
EM PTY
VEHICLE
W EIG HT
lbs
kg
M AXIM UM
W HEEL
LO AD
lbs
kg
ENG INE
PO W ERED
M O DELS
hp
kW
BATTERY
PO W ERED
M O DELS
V
DRIVE
M O TO RS
BATTERIES
V
Ah
M O NTH / YEAR
O F M ANUFACTURE
M AXIM UM
PLATFO RM
HEIG HT
RATED
NUM BER O F
O CCUPANTS
M AXIM UM
DRIVE
HEIG HT
ft
m
UNRESTRICTED
PLATFO RM
CAPACITY
lbs
kg
M AXIM UM
ALLO WABLE
W IND SPEED
m ph
m /s
M AXIM UM
PLATFO RM
REACH
ft
m
0070901
Axle w eights w ith m achine in the stow ed position.
lbs
lbs
kg
kg
DRIVE AXLE
STEER AXLE
Do not rem ove any weight from this m achine.
Any weight added m ust be distributed equally on each axle.
M AXIM UM
ALLO WABLE
M ANUAL FO RCE
(SIDE PULL)
lbs
N
Indoors
O utdoors
SLO PE SENSO R ALARM SETTING
FRO NT
TO BACK
deg
SIDE
TO SIDE
deg
M AXIM UM
O UTRIG G ER
LO AD
M AXIM UM
G RADEABILITY
%
CHARG ER
INPUT
V
Snorkel International
2009 Roseport Road
Elw ood, KS 66024
1-800-255-0317
0070901
Содержание S1930E
