Snorkel S1930E, Руководство оператора, Страница: 25 / 58

Chapter 7 – Controls
S1930E/S1932E/S2632E – 1360460 21
Interlock Switch
The joystick has an interlock switch in the handle (refer
to Figure 7.3).
Engage the interlock by grasping the joystick and
pulling the switch toward the handle.
Engage the interlock to activate the steering, drive,
or lift functions.
Steer Switch
The steer switch (refer to Figure 7.3) is a momentary
contact, rocker switch on top of the drive joystick. This
switch controls the two front wheels to steer the aerial
platform.
To steer to the right, engage the interlock switch on
the joystick and hold down the right side of the steer
switch.
To steer to the left, engage the interlock switch on
the joystick and hold down the left side of the steer
switch.
Note
The steering wheels are not self-centering. Set the steer-
ing wheels straight ahead after completing a turn.
Drive Range Switch – S2632 Only
The drive range switch has two positions to select drive
wheel operation:
High (Rabbit) – for normal driving conditions
Low (Turtle) – for driving on grades up to 25 per-
cent that require low speed and high torque opera-
tion, where high range is not sufficient to climb the
grade.






Horn Button
The horn button (refer to Figure 7.3) is on the left side of
the upper control panel.
Press the button to sound the horn.
Battery Condition Indicator
The optional battery condition indicator gauge is on the
top of the upper control box. It indicates the level of avail-
able battery power to operate the aerial platform.
Circuit Breaker Reset Button
The electrical power outlet at the platform has a 15 amp
circuit breaker. The reset button in on the bottom of the
electrical box. The circuit breaker protects the electrical
wiring and components from electrical overload in the
case of a short circuit or other fault.
Caution
A tripped circuit breaker indicates a malfunction in
the electrical system. Component damage can result
if the cause of the malfunction is not corrected. Do
not operate the aerial platform if the circuit breaker
trips repeatedly.
Push the reset button to reset the circuit breaker.