Snorkel MHP1335, Руководство по техническому обслуживанию и ремонту, Страница: 14 / 108

page viii MHP13/35 – 12431B
Maintenance Information
■
90 Day or 150 Hour Maintenance
(Trained Service Technician)
Components Service Required Recommended Lubricant or Further
Instructions
Daily maintenance Perform maintenance as per schedule
Preventive inspection
maintenance checklist Perform inspection, complete form Retain copy of checklist
Placards and decals inspection Inspect using drawing and parts listing
in section 1 (repair parts) Replace any missing or
unreadable decals/placards
Rotation bearing Lubricate Conoco Super Sta #2
Above 32° Mobilgrease CM-P
Below 32° Mobilgrease CM-L
Rotation bearing teeth & pinion Lubricate Conoco Super Sta #2
Above 32° Mobilgrease CM-P
Below 32° Mobilgrease CM-L
Platform rotator Check smooth operation Repair or replace if not working
properly
Platform controller Check smooth operation & speeds
Battery Check specific gravity 1.260/1.275 at 27° C.
Hydraulic return filter Check condition Replace if dirty
Engine RPM Check for proper engine RPM (2500) See engine manufactures owner's
manual
Engine oil Replace per engine owners manual
■
Yearly or 500 Hour Maintenance
(Trained Service Technician)
Components Service Required Recommended Lubricant or Further
Instructions
90 day or 150 hour maintenance Perform maintenance per schedule
Hydraulic oil reservoir Clean and replace fluid Shell Tellus 32 or similar
Hydraulic return filter Replace After 1st. 50 hours, thereafter
at recommended interval
Hydraulic pressures Check pressures