Snorkel MHP1335, Руководство по техническому обслуживанию и ремонту, Страница: 13 / 108

■
Daily Maintenance
MHP13/35 – 12431B page vii
Maintenance Information
❑
Pre-operational Inspection
Components Service Required
Engine fuel level Check fuel tank level (full)
Fuel tank cap Visually inspect (installation, tightness)
Engine oil level Check oil level (between dipstick lines)
Fuel leaks Visually inspect (hoses, connections, etc.)
Wiring harnesses Visually inspect (installation, condition)
Battery terminals Visually inspect (no corrosion)
Battery fluid level Check fluid level (1/4" or 6 mm below filler neck)
Hydraulic oil Check fluid level (between lines on tank)
Hydraulic oil leaks Visually inspect (hoses, tubes)
Tires and wheels Visually inspect (condition)
Bolts and fasteners Visually inspect (looseness)
Structural damage and welds Visually inspect (weld cracks, dents)
Lanyard anchor points Visually inspect (condition)
Platform gate Visually inspect (operation)
Platform guardrails Visually inspect (condition)
Air filter Check condition
Control switches Actuate and inspect (operation)
Emergency lower Check operation (causes correct motion)
Placards and decals Visually inspect (installation, condition)
Optional items Check operation
Pins and pin keepers Visually inspect (installation, condition)
■
Hydraulic Hose Age
EN982 Clause 7.3.1 requires the manufacturing date of each hydraulic hose to be clearly visible on the
hose.
Hoses used in production of this unit are manufactured by Parker and the manufacturing date is present in
a coded format.
The key to decode the date is as follows:
11 - 4Q 99
11- 4Q 99
Manufacturing Plant Number
Sample Hose Code
Year of Manufacture
Manufacturing Period (i.e. 4th Quarter)