Snorkel MHP 15 J, Руководство по техническому обслуживанию и ремонту

Страница: 9 / 60

■
Daily Maintenance
MHP15J – 11995B page 7
Maintenance Information
❑
Pre-operational Inspection
Item Service Required
Engine fuel level Look to see that the fuel tank is full
Fuel tank cap Check to see that the cap is tight
Engine oil level Check oil level (between dipstick lines)
Fuel leaks Visually inspect (hoses and connections)
Engine cooling Check that grills are not blocked
Wiring harnesses Visually inspect (installation, condition)
Battery terminals Visually inspect (no corrosion)
Battery fluid level Check fluid level (1/4" or 6 mm below filler neck)
Hydraulic oil level Visually inspect level (between lines on gauge)
Hydraulic oil leaks Visually inspect (hoses, tubes)
Tires and wheels Visually inspect (condition)
Bolts and fasteners Visually inspect (condition)
Structural damage and welds Visually inspect (weld cracks, dents)
Lanyard anchor points Visually inspect (condition)
Platform gravity gate Check condition and operation
Platform guardrails Visually inspect (condition)
Flashing light (option) Visually inspect (operation)
Ground control switches Actuate and inspect for proper operation
Emergency lower Check operation (causes correct motion)
■
Hydraulic Hose Age
EN982 Clause 7.3.1 requires the manufacturing date of each hydraulic hose to be clearly visible on the
hose.
Hoses used in production of this unit are manufactured by Parker and the manufacturing date is present in
a coded format.
The key to decode the date is as follows:
11 - 4Q 99
11- 4Q 99
Manufacturing Plant Number
Sample Hose Code
Year of Manufacture
Manufacturing Period (i.e. 4th Quarter)