Snorkel MHP 15 J, Руководство по техническому обслуживанию и ремонту

Страница: 7 / 60

Maintenance Information
■
About this Manual:
This Maintenance and Repair Parts manual covers
current production machines only.
While Snorkel has attempted in every way to
confirm that all information in this manual is correct,
improvements are being constantly made to the
machine that may not be reflected in this manual.
NOTE:
It is recommended that you record the serial and
model number of your machine (see page 14 of this
chapter). This information is found on the serial
number placard.
■
Manual Organization
The Repair Parts Manual consists of five sections
with an individual table of contents preceding
sections 1 through 4.
Subassemblies and detailed parts are identified by
index numbers on the illustrations that correspond
to the item numbers on the parts listing. When
requesting any part, always specify complete part
number, description, model and serial number of
your unit.
The following is a general description of each
section and its contents.
❑
General Specifications
The section immediately preceding, contains
information relating to the general specifications of
the MHP15J.
❑
Maintenance
The pages immediately following, contain
information as to the maintenance schedules -
lubricants and procedures for proper lubrication of
the unit.
❑
Repair parts and illustrations
Repair Parts (Section 1), contains parts listings
and illustrations for general mechanical repair
parts of all major installations and subassemblies
of the unit.Hydraulics
❑
Hydraulics
(Section 2), contains parts listings and illustrations
of hydraulic components installations including
hydraulic schematics and individual components
such as cylinders, controls valves and solenoid
operated valves.
❑
Electrical
Electrical (Section 3), contains listings and
illustrations of electrical components installations
including wiring schematics.
❑
Options
Options (Section 4), contains parts listings and
illustrations of optional installations that may be
installed on your unit.
❑
Parts index - Page locator
The parts index - page locator, identifies the
component by name and directs you to the section
and page number where you may find information
for that part such as its part order number, etc.
■
Maintenance and Schematics
❑
Maintenance information
The parts drawings located in the repair parts
sections, are designed for use as a guide for proper
disassembly of the machine and components as
well as for parts replacement. Always refer to the
hydraulic system installation drawings and the
electrical wiring diagram before removing or
disassembling associated parts.
Do not attempt to disconnect or remove any
h y d r a u l i c l i n e b e f o r e r e a d i n g a n d
understanding all text concerning the
s y s t e m h y d r a u l i c s . I n m o s t c a s e s ,
disassembly of the machine will be obvious
from the illustration.
DO NOT mod ify this ariel plat form with out
prior writ ten con sent of Snor kel En gi neering
De part ment.
Mod i fi ca tion may void the war ranty,
ad versely af fect sta bil ity, or af fect the
op er a tional char ac ter is tics of the ariel
plat form.
W h e n d i s a s s e m b l i n g o r r e a s s e m b l i n g
components, complete the procedural steps in
sequence. Do not partially disassemble or
assemble one part, then start on another. Always
check your work to assure that nothing has been
overlooked.
The following list is a gentle reminder when
disassembling or assembling the machine.
MHP15J – 11995B page 5
CAUTION
CAUTION