6 • UK
7 • UK
4. Installing the Syrius using the Windscreen Suction Cup bracket
You can mount your Syrius to the inside of your vehicles windscreen using the
windscreen bracket provided.
Clean the area where you wish to position
●
●
the bracket thoroughly with a good quality
glass cleaner. This allows a more secure seal
on the windscreen.
Place the suction cup and bracket on
●
●
the windscreen and push the locking
lever towards the windscreen to secure
the bracket.
Adjust the angle of the bracket so that
●
●
when the unit is attached to it you can
view the display and operate the controls
safely.
Position the Syrius onto the bracket, by sliding
●
●
it onto it as indicated. Remove the Syrius by sliding
the unit upwards and off the bracket.
The Syrius can be powered directly either
●
●
from the internal battery if it is fully
charged or powered from the cigarette
lighter socket. To use the cigarette lighter
socket, plug the smaller plug on one
end of the power cable into the socket
marked DC 5V on the back of the Syrius
and plug the larger plug into the
cigarette lighter socket of your vehicle.
Please Note: Only use the cigarette lighter power cable provided with the Syrius.
The Syrius operates on 5V not 12V and using any other cigarette lighter power cable
will damage your device and void the warranty.
Locking
lever
Bracket
adjusters
