65
Manual update
Manual update is only needed when the usual phone
update mechanism gets stuck. This could happen
when for some reason, important settings on the
phone are read-only and the user cannot set up the
correct IP address, net mask and so on.
The manual mode erases all settings so that the
phone has to be setup again. However, in a proper
setup environment, this is done automatically.
To get into manual update mode, keep the cancel key
pressed during start up. The phone will prompt for
§
an IP address,
§
the net mask,
§
the default gateway,
§
a tftp server.
In this mode, the keyboard is mapped according to
the following description:
Function keys F1 or F2 move to the next (">>") or
previous ("<<") entry. To delete the last Character
enter F3 ("Del") and to delete the whole entry use F4
("Clr"). * and # skip to the next sub section of an IP
address.
After entering the required information and pressing
enter, the phone will try to get the image
“snom100.bin” from the tftp server. Therefore, you
have to set up a tftp server. (See the Linux documen-
tation or for Microsoft Windows operating system ask
our support or FAQ list).
You can get images from
www.snom.de/download
.
The latest software versions are shown in
www.snom.de/download/snom100-firmware.htm
. Do
not use the boot loader, use the firmware link instead.
Remember to rename the downloaded images to
“snom100.bin“.
Содержание 100
