3 of 18
IMPORTANT
■ Always check areas to be spread to be sure no hazardous conditions or substances are in the
area.
■ Never operate equipment when under the influence of alcohol, drugs or medication that might
alter your judgement and / or reaction time.
■ Do not overfill Spreader. (See decal on Spreader for fill capacities)
■ Failure to keep Conveyor Chain Links lubricated and free running can damage the Conveyor Chain,
Drive Shafts and body structure.
■ Failure to maintain Conveyor Chain or other components can void warranty.
Complete this Check List Prior to Initial Start-Up & Operation
Read and understand Curtis Owner’s & Operator’s Manual.
Read and understand Engine Manual.
Read and understand ALL Warning Decals.
Check Fuel Level.
Check Engine Oil Level.
Grease all Lubrication Points.
Oil Conveyor Chain.
Wire In-Cab Control Panel.
Coat Harness Connector Ends with Dielectric Grease.
Verify Spreader is secure in Vehicle using provided Ratchet Straps.
For Utility Vehicle applications (i.e. JD Gator, Kawasaki Mule, etc.)
Dump Body Safety Chain must be attached to secure Dump
Body & Prevent accidental release of Dump Body.
For Pickup Truck Applications make sure locking Bolts are in place
before moving vehicle.
General Maintenance Requirements
1. Wash Unit thoroughly after each use.
2. Lubricate Bearings
3. Periodically Lubricate Conveyor Chain with new or used Engine Oil.
4. Check Engine Oil every 5 hours or daily before use.
5. Change Engine Oil every 50 hours of Operation or every season.
6. Service Engine Air Filter every 100 Hours of Operation or every season.
