14 of 25
Home-Pro 3000 Assembly Instructions
Figure 7. Mount Lift Frame to A-Frame Side Plates
Align on both sides
of Lift Frame and secure
with 5/8" Bolts
Align on both sides of Lift Frame
and secure with 5/8" Bolts
Lift Frame
2-PERSON LIFT
Section 5. Mount Lift Frame to A-Frame Side Plates
A.)
With assistance, position Lift Frame to Side Plates and mount with (4) 5/8"-18 x 1-3/4" Bolts and
5/8"-18 Lock Nuts. To provide proper clearance, 5/8" Bolts must be installed from the inside of Lift
Frame with Lock Nuts located on the outside of Lift Frame. This is necessary to provide proper
clearance. Tighten 5/8" Gr.8 fasteners mounting the Lift Frame to 225 ft./lbs., then fully tighten the
Patch Bolts retaining the Side Plates to 55 ft/lbs.
Refer to Figures 7 & 8.
The Side Plates have (3) sets of holes that can be used for mounting the Lift Frame.
Refer to Page 19 for information on determining hole locations.
Installing the Lift Frame in the incorrect holes will affect the attachment and
removal of the Plow to the vehicle.
When setting up the Plow for the first time, adjust the Plow Chain so that the Lift
Frame Attaching Forks are parallel to the A-Frame. Once Plow is set-up correctly,
index the Chain for future reference. Due to variations from truck to truck, one
link adjustments may be necessary to fine tune the individual Plow to a specific
vehicle.
NOTE
ADDITIONAL
NOTES
