Installation Guide
55
4.6.2
Pole Thin/Wide Box Mounting
Package Contents:
•
M8x16 Screw x4
•
Washer-8 x4
•
Spring Washer x4,
•
Stainless Steel Straps x4
Items Needed:
•
Dome Camera
•
Data Cable (supplied)
•
Ethernet Cable (network Dome Camera)
•
Standard/ Compact
Pendent Mount and equipped items (optional
accessory)
•
Pole Thin/Wide Box Mounting (optional accessory)
•
Indoor Mount Kit (optional accessory)
•
Waterproof Rubber (Indoor Mount Kit’s accessory)
•
Stainless Steel Straps for fixing the Pole Thin/Wide Box Mounting (optional
accessory)
Tools Needed:
•
Stainless Strap Cutter
•
Tool for screwing
Follow the steps below to mount the Dome Camera with the Pole Thin/Wide
Box and Standard/ Compact Pendent Mount.
1) Fasten the Pole Thin/Wide Box on a pole with equipped stainless straps.
2) Run the cable(s) through the hole on the Pole Thin/Wide Box Mounting
with the Data Cable’s 22-pin cable coming out.
3) Fasten the Standard/ Compact Pendent Mount onto the Pole Thin/Wide
Box Mounting with the supplied screws and washers. Then thread the
cable(s) through the Standard/ Compact Pendent Mount with the cable(s)
coming out of the Pendent Mount’s outlet.
NOTE: Please block the cable entry hole with the supplied sponge
to avoid insects entering the Pendent Mount. See the illustrations
in section
4.4.2 Compact Pendent Mount
> Step 4.
4) Attach the Waterproof Rubber to the Standard/ Compact Pendent Mount.
