Installation Guide
3
Warnings and Cautions
•
Handle the camera carefully
Do not abuse the camera. Avoid striking, shaking, etc. The camera could
be damaged by improper handing or storage.
•
Installing electricity wiring carefully
Ask qualified personnel of electrical wiring for the installation. Please note
that input electricity to the unit is at tolerance of DC 12V/AC 24V ± 10%.
The camera is capable of surge protection; ensure AC power model unit
grounded appropriately against damage of heavy current or electric
shock.
•
Do not disassemble the camera
To prevent electric shock, do not remove screws or covers. There are no
user serviceable parts inside. Ask a qualified service person for servicing.
•
Do not block cooling holes on the bracket
This camera has a cooling fan inside. Blocking the cooling holes leads to
build up of heat the camera and may cause malfunction.
•
Do not operate the camera beyond the specified temperature,
humidity or power source ratings
Use the camera under conditions where temperature is between 0°C ~
40°C (32°F ~ 104°F), and relative humidity is below 90%.
•
Do not expose the camera to rain or moisture, or try to operated it in
wet areas
This product is designed for indoor use or locations where it is protected
from rain and moisture. Turn the power off immediately if the camera is
wet and ask a qualified service person for servicing. Moisture can damage
the camera and also create the danger of electric shock.
•
Do not use strong or abrasive detergents when cleaning the camera
body
Use a dry cloth to clean the camera when it is dirty. In case the dirt is hard
to remove, use a mild detergent and wipe the camera gently.
