Snell PYXIS Скачать руководство пользователя страница 11

Страница: 11 / 101

Issue 2.3

PYXIS
System User Guide

door being closed. Do not operate the router for extended times with the door open.

3.1.3 Before Switch-On.

Before you switch-on, check the following items:-

a. Check the correct fuse has been fitted.

b. If a dual power supply is fitted, there will be two mains IEC sockets requiring two power cords (3U

only).

c. Ensure the power modules are firmly in place.

d. Check all other modules are in place.

e. Ensure adequate ventilation.

3.1.4 3U Frame Layout

Figure 3: 3U Frame - Layout

The 3U Pyxis frame has four horizontal slots for signal modules.

It also has two slots for power supplies, the frame can run from one but the second provides
redundancy in case of power supply failure.

Above the PSU’s are two slots for controllers, the unit only needs one ‘MASTER’ or ‘ACTIVE’
controller the other slot is for a ‘SLAVE’ or ‘IDLE’ controller there to provide redundancy if the active
controller fails.

Access to PSU2 or Slot 4 requires the door to be removed.

3.1.5 Fitting and removing the frame door

To remove the door from the frame, open it to approximately 30



and lift upwards. The design of the hinge

assembly prevents the door from being removed if it is at a greater angle.

Содержание PYXIS






































































































Результаты поиска

Содержание PYXIS

Отзывы:

Похожие инструкции для PYXIS

Бренды по названию

Популярные бренды

Snell PYXIS, Руководство пользователя системы

Результаты поиска

Содержание PYXIS

Отзывы:

Похожие инструкции для PYXIS

Бренды по названию

Популярные бренды