Snell ES-103, Руководство по эксплуатации и перечень запасных частей

Страница: 6 / 44

AS-23-33 2019.06
6
Operating

Turn the timer knob to determine the length of strapping supplied for next cycle. Timer graduations
are provided from 0 to 5
seconds.
The length of strap fed out in one second is approx. 1 meter.

Place a package on the top of the machine, and pass the free end around the package; insert the
leading end of the strapping into the strapping inlet until the leading end is detected.

Weld cooling time
Weld cooling time adjustable; the cooling delay time can be adjusted from 0~1.2 sets, delay time
will be longer by turning VR clockwise.

Tightening of strapping starts as soon as the strap is detected and the heat sealing process automati-
cally takes place after completion of tightening. After these processes have been completed, a preset
length of the strapping is dispensed automatically. This is one complete cycle.

After cycle is completed, motor will turn off automatically if strapping cycle is not initiated within
30 seconds.
Attention:

Be sure to turn off the main power switch after operation is completed for the day.