SHDFTRX
OPERATION
SHDFTRX
Version 1 Issue 5
180203
2
Introduction to this Operation Manual
This manual covers the operation and use of the modules described below.
WARNING…
THE FRONT PANEL OF THE UNIT MUST NOT BE
OPENED BY THE OPERATOR. ACCESS IS ONLY
PERMITTED TO FULLY QUALIFIED
INSTALLATION ENGINEERS.
System HD Modules must only be installed and/or replaced by qualified service personnel, with reference to
the System HD Installation guide. Refer all installation and servicing to qualified personnel only.
All laser transmitters used in this product are Class
1 in accordance
with EN60825-1 as well as 21CFR 1040.10 and
1040.11
1. Laser light can be damaging to the eyes.
Optical fibres and Uniters should be handled with
great care.
2. System HD Modules which incorporate Fibre
Optic elements, are designed for use with Class 1
laser systems only. Ensure that all inputs do NOT
exceed Class 1 as doing so will impair the safety
of the system and may result in damage to the
equipment.
3. Active fibres should not be handled unless
their source can be positively identified as not
exceeding Class 1 limits.