SNBC BTP-M300 Скачать руководство пользователя страница 4

Страница: 4 / 52

BTP-M300 Programming Manual

- 2 -

Declaration

If you need this manual, please comply with the Clause as below.

If you disagree with it, please return this manual immediately.

This manual contains the private confidential information belonging to Shandong New Beiyang

Info-Tech Co., Ltd. (hereinafter referred to as SNBC) or its distributors. You must keep its relative

content as the confidential information. If the users are commercial customers or entities, you should

be aware to disclose it to those people with the confidential responsibility including your employees,

agencies and partners. When you terminate the cooperation with SNBC or bring about your request,

you have to stop using this manual and return it to SNBC or its distributor, or destroy the confidential

information.

If any relative organ such as court, arbitrator or government authority requests you to disclose any

confidential information of this manual, you must inform SNBC quickly and also agree that you shall

cooperate or assist with SNBC reasonably during the negotiation.

SNBC has the right to disclose its confidential information and is not responsible for the loss or

damages caused from the wrong usage or reference of this manual by users.

Information in this document is subject to change without notice, which is only used for product

maintenance or service relative to this manual. SNBC reserves the right to improve products as new

technology, components, software, and firmware become available. If users need further data about

the products, please feel free to contact SNBC or your local distributor.

No part of this document may be reproduced or transmitted in any form or by any means, electronic or

mechanical, for any purpose without the express written permission of SNBC.

Printed in China

Trademark

Our registered trademark is

Address: No.169 huoju road, high-tech zone, Weihai, China

Hot line: 400-618-1368, 800-860-1368

Fax: +86-631-5656098

PC: 264209

Website: www.newbeiyang.com.cn

Содержание BTP-M300





















































Результаты поиска

Содержание BTP-M300

Отзывы:

SNBC BTP-M300, Руководство по программированию, Страница: 4 / 52

Результаты поиска

Содержание BTP-M300

Отзывы: